DPX44-866 Diplexer – VHF/UHF/WREN/TSM
Part Number: DPX44-866
DOCUMENTS:
The DPX44-866 is a 3-port diplexer. The first port has a pass-band of 30 to 450 MHz. Options are available that increase the frequency range to 512 MHz and above. The second port has a pass-band of 1350 to 1850 MHz for the Soldier Radio Waveform (SRW). This diplexer has excellent electrical properties for isolating VHF/UHF communications and UHF SATCOM bands from IFF, TACAN and SRW bands. It is extremely durable and will pass all military environmental requirements. This is a cost-effective, light-weight solution for combining and isolating RF systems. By using this diplexer with a single connector antenna such as the VL10-421 you can run a single coaxial cable to two receivers if they are in close proximity.
CONTACT USProduct Info
Filter Coupler Electrical Properties
Filter Coupler Physical Properties
Frequency Range (MHz) : 30-450 MHz (port 1); 1350-1850 MHz (port 2)
VSWR : 1.7:1
Impedance : 50 Ohms
Power : 100 Watts CW
Insertion Loss : 1.0 dB at 30-450 MHz; 1.5 dB at 1350-1390 MHz; 1.0 dB at 1750-1850 MHz
Attenuation : 60 dB
VSWR : 1.7:1
Impedance : 50 Ohms
Power : 100 Watts CW
Insertion Loss : 1.0 dB at 30-450 MHz; 1.5 dB at 1350-1390 MHz; 1.0 dB at 1750-1850 MHz
Attenuation : 60 dB
Material : Aluminum
Finish : MIL-DTL-5541 Type II Class 3
Finish : MIL-DTL-5541 Type II Class 3
Filter Coupler General Properties
Applications : Diplexer is designed to be used to connect two radios to a single antenna or two antennas to a single radio.
Type : VHF/UHF/WREN/TSM
Type : VHF/UHF/WREN/TSM
Federal Specifications
MIL-STD-810F
Product Info
Filter Coupler Electrical Properties
Frequency Range (MHz) : 30-450 MHz (port 1); 1350-1850 MHz (port 2)
VSWR : 1.7:1
Impedance : 50 Ohms
Power : 100 Watts CW
Insertion Loss : 1.0 dB at 30-450 MHz; 1.5 dB at 1350-1390 MHz; 1.0 dB at 1750-1850 MHz
Attenuation : 60 dB
VSWR : 1.7:1
Impedance : 50 Ohms
Power : 100 Watts CW
Insertion Loss : 1.0 dB at 30-450 MHz; 1.5 dB at 1350-1390 MHz; 1.0 dB at 1750-1850 MHz
Attenuation : 60 dB
Filter Coupler Physical Properties
Material : Aluminum
Finish : MIL-DTL-5541 Type II Class 3
Finish : MIL-DTL-5541 Type II Class 3
Federal Specifications
MIL-STD-810F
Accesories and Options